Nix now requires SQLite and bzip2 to be pre-installed. SQLite is
detected using pkg-config. We required DBD::SQLite anyway, so
depending on SQLite is not a big problem.
The --with-bzip2, --with-openssl and --with-sqlite flags are gone.
environment of the given derivation in a format that can be sourced
by the shell, e.g.
$ eval "$(nix-store --print-env $(nix-instantiate /etc/nixos/nixpkgs -A pkg))"
$ NIX_BUILD_TOP=/tmp
$ source $stdenv/setup
This is especially useful to reproduce the environment used to build
a package outside of its builder for development purposes.
TODO: add a nix-build option to do the above and fetch the
dependencies of the derivation as well.
the contents of any of the given store paths have been modified.
E.g.
$ nix-store --verify-path $(nix-store -qR /var/run/current-system)
path `/nix/store/m2smyiwbxidlprfxfz4rjlvz2c3mg58y-etc' was modified! expected hash `fc87e271c5fdf179b47939b08ad13440493805584b35e3014109d04d8436e7b8', got `20f1a47281b3c0cbe299ce47ad5ca7340b20ab34246426915fce0ee9116483aa'
All paths are checked; the exit code is 1 if any path has been
modified, 0 otherwise.
brackets, e.g.
import <nixpkgs/pkgs/lib>
are resolved by looking them up relative to the elements listed in
the search path. This allows us to get rid of hacks like
import "${builtins.getEnv "NIXPKGS_ALL"}/pkgs/lib"
The search path can be specified through the ‘-I’ command-line flag
and through the colon-separated ‘NIX_PATH’ environment variable,
e.g.,
$ nix-build -I /etc/nixos ...
If a file is not found in the search path, an error message is
lazily thrown.
(Linux) machines no longer maintain the atime because it's too
expensive, and on the machines where --use-atime is useful (like the
buildfarm), reading the atimes on the entire Nix store takes way too
much time to make it practical.
NixOS evaluation errors in particular look intimidating and
generally aren't very useful. Ideally the builtins.throw messages
should be self-contained.
UTC) rather than 0 (00:00:00). 1 is a better choice because some
programs use 0 as a special value. For instance, the Template
Toolkit uses a timestamp of 0 to denote the non-existence of a file,
so it barfs on files in the Nix store (see
template-toolkit-nix-store.patch in Nixpkgs). Similarly, Maya 2008
fails to load script directories with a timestamp of 0 and can't be
patched because it's closed source.
This will also shut up those "implausibly old time stamp" GNU tar
warnings.
logic through the `parseDrvName' and `compareVersions' primops.
This will allow expressions to easily check whether some dependency
is a specific needed version or falls in some version range. See
tests/lang/eval-okay-versions.nix for examples.
single quotes. Example (from NixOS):
job = ''
start on network-interfaces
start script
rm -f /var/run/opengl-driver
${if videoDriver == "nvidia"
then "ln -sf ${nvidiaDrivers} /var/run/opengl-driver"
else if cfg.driSupport
then "ln -sf ${mesa} /var/run/opengl-driver"
else ""
}
rm -f /var/log/slim.log
end script
'';
This style has two big advantages:
- \, ' and " aren't special, only '' and ${. So you get a lot less
escaping in shell scripts / configuration files in Nixpkgs/NixOS.
The delimiter '' is rare in scripts (and can usually be written as
""). ${ is also fairly rare.
Other delimiters such as <<...>>, {{...}} and <|...|> were also
considered but this one appears to have the fewest drawbacks
(thanks Martin).
- Indentation is intelligently stripped so that multi-line strings
can follow the nesting structure of the containing Nix
expression. E.g. in the example above 6 spaces are stripped from
the start of each line. This prevents unnecessary indentation in
generated files (which sometimes even breaks things).
See tests/lang/eval-okay-ind-string.nix for some examples.
but installations/upgrades as well. So `nix-env -ub \*' will
upgrade only those packages for which a substitute is available (or
to be precise, it will upgrade each package to the highest version
for which a substitute is available).
Nix expressions in that directory are combined into an attribute set
{file1 = import file1; file2 = import file2; ...}, i.e. each Nix
expression is an attribute with the file name as the attribute
name. Also recurses into directories.
* nix-env: removed the "--import" (-I) option which set the
~/.nix-defexpr symlink.
* nix-channel: don't use "nix-env --import", instead symlink
~/.nix-defexpr/channels. So finally nix-channel --update doesn't
override any default Nix expressions but combines with them.
This means that you can have (say) a local Nixpkgs SVN tree and use
it as a default for nix-env:
$ ln -s .../path-to-nixpkgs-tree ~/.nix-defexpr/nixpkgs_svn
and be subscribed to channels (including Nixpkgs) at the same time.
(If there is any ambiguity, the -A flag can be used to
disambiguate, e.g. "nix-env -i -A nixpkgs_svn.pan".)
need any info on substitutable paths, we just call the substituters
(such as download-using-manifests.pl) directly. This means that
it's no longer necessary for nix-pull to register substitutes or for
nix-channel to clear them, which makes those operations much faster
(NIX-95). Also, we don't have to worry about keeping nix-pull
manifests (in /nix/var/nix/manifests) and the database in sync with
each other.
The downside is that there is some overhead in calling an external
program to get the substitutes info. For instance, "nix-env -qas"
takes a bit longer.
Abolishing the substitutes table also makes the logic in
local-store.cc simpler, as we don't need to store info for invalid
paths. On the downside, you cannot do things like "nix-store -qR"
on a substitutable but invalid path (but nobody did that anyway).
* Never catch interrupts (the Interrupted exception).
by priority and version install. That is, if there are multiple
packages with the same name, then pick the package with the highest
priority, and only use the version if there are multiple packages
with the same priority.
This makes it possible to mark specific versions/variant in Nixpkgs
more or less desirable than others. A typical example would be a
beta version of some package (e.g., "gcc-4.2.0rc1") which should not
be installed even though it is the highest version, except when it
is explicitly selected (e.g., "nix-env -i gcc-4.2.0rc1").
* Idem for nix-env -u, only the semantics are a bit trickier since we
also need to take into account the priority of the currently
installed package (we never upgrade to a lower priority, unless
--always is given).
a user environment by an install or upgrade action. This is
particularly useful if you have a version installed that you don't
want to upgrade (e.g., because the newer versions are broken).
Example:
$ nix-env -u zapping --dry-run
(dry run; not doing anything)
upgrading `zapping-0.9.6' to `zapping-0.10cvs6'
$ nix-env --set-flag keep true zapping
$ nix-env -u zapping --dry-run
(dry run; not doing anything)
However, "-e" will still uninstall the package. (Maybe we should
require the keep flag to be explicitly set to false before it can be
uninstalled.)
user environment collission between two packages due to overlapping
file names, then a package with a higher priority will overwrite the
symlinks of a package with a lower priority. E.g.,
$ nix-env --set-flag priority 5 gcc
$ nix-env --set-flag priority 10 binutils
gives gcc a higher priority than binutils (higher number = lower
priority).
to show only those derivations whose output is already in the Nix
store or that can be substituted (i.e., downloaded from somewhere).
In other words, it shows the packages that can be installed “quickly”,
i.e., don’t need to be built from source.
attribute) about installed packages in user environments. Thus, an
operation like `nix-env -q --description' shows useful information
not only on available packages but also on installed packages.
* nix-env now passes the entire manifest as an argument to the Nix
expression of the user environment builder (not just a list of
paths), so that in particular the user environment builder has
access to the meta attributes.
* New operation `--set-flag' in nix-env to change meta info of
installed packages. This will be useful to pass per-package
policies to the user environment builder (e.g., how to resolve
collision or whether to disable a package (NIX-80)) or upgrade
policies in nix-env (e.g., that a package should be "masked", that
is, left untouched by upgrade actions). Example:
$ nix-env --set-flag enabled false ghc-6.4
* `sub' to subtract two numbers.
* `stringLength' to get the length of a string.
* `substring' to get a substring of a string. These should be enough
to allow most string operations to be expressed.
* nix-unpack-closure: extract the top-level paths from the closure and
print them on stdout. This allows them to be installed, e.g.,
"nix-env -i $(nix-unpack-closure)". (NIX-64)
from a source directory. All files for which a predicate function
returns true are copied to the store. Typical example is to leave
out the .svn directory:
stdenv.mkDerivation {
...
src = builtins.filterSource
(path: baseNameOf (toString path) != ".svn")
./source-dir;
# as opposed to
# src = ./source-dir;
}
This is important because the .svn directory influences the hash in
a rather unpredictable and variable way.
single derivation specified by the argument. This is useful when we
want to have a profile for a single derivation, such as a server
configuration. Then we can just say (e.g.)
$ nix-env -p /.../server-profile -f server.nix --set -A server
We can't do queries or upgrades on such a profile, but we can do
rollbacks. The advantage over -i is that we don't have to worry
about other packages having been installed in the profile
previously; --set gets rid of them.
seconds without producing output on stdout or stderr (NIX-65). This
timeout can be specified using the `--max-silent-time' option or the
`build-max-silent-time' configuration setting. The default is
infinity (0).
* Fix a tricky race condition: if we kill the build user before the
child has done its setuid() to the build user uid, then it won't be
killed, and we'll potentially lock up in pid.wait(). So also send a
conventional kill to the child.
graph to be passed to a builder. This attribute should be a list of
pairs [name1 path1 name2 path2 ...]. The references graph of each
`pathN' will be stored in a text file `nameN' in the temporary build
directory. The text files have the format used by `nix-store
--register-validity'. However, the deriver fields are left empty.
`exportReferencesGraph' is useful for builders that want to do
something with the closure of a store path. Examples: the builders
that make initrds and ISO images for NixOS.
`exportReferencesGraph' is entirely pure. It's necessary because
otherwise the only way for a builder to get this information would
be to call `nix-store' directly, which is not allowed (though
unfortunately possible).
available. For instance,
$ nix-store -l $(which svn) | less
lets you read the build log of the Subversion instance in your
profile.
* `nix-store -qb': if applied to a non-derivation, take the deriver.
