Improve tests and docs prior to refactoring completions
(cherry picked from commit 5442d9b47298389918d1f38d20f768a80ffc2369)
Change-Id: Ief99ac2cd9c92981a9a522d15b9c3daf99182c9d
Factor out bits of the worker protocol to use elsewhere
(cherry picked from commit 4b1a97338f517f45e6169d3d8845c5caa5724e97)
Change-Id: If93afa0f8b1cf9b0e705b34fa71e6fd708752758
Use positive source filtering for the standalone functional tests job and Perl bindings
(cherry picked from commit 6b6bd9003062c86a49d4384381941cf57f269c45)
Change-Id: I896be67654f893d543ed6beb5d0d0d6c6d36e027
Don't run the tests that require building if we're not building
(cherry picked from commit 8cfa582f436db8066eff74cb084990367e014ce6)
Change-Id: I6085ca6107349669407340d7a5e52639a2febc90
Enable most of the third `BuildResult` worker protocol test
(cherry picked from commit d344c112f772282bacacd4c66a75df4022d16e12)
Change-Id: I7b2b72aa84c19a6069f9c12128d901262db6f91c
Test the rest of the worker protocol serializers
(cherry picked from commit 2f1c16dfa2378fd8616bff1b9b7cd0b4d42af69b)
Change-Id: Idfd72d32b21d14a260e02f65531d287cef7464d2
Unit test some worker protocol serializers
(cherry picked from commit c6faef61a6f31c71146aee5d88168e861df9a22a)
Change-Id: I99e36f5f17eb7642211a4e42a16b143424f164b4
Previously, IFDs would be built within the eval store, even though one
is typically using `--eval-store` precisely to *avoid* local builds.
Because the resulting Nix expression must be copied back to the eval
store in order to be imported, this requires the eval store to trust
the build store's signatures.
(cherry picked from commit c3942ef85ffbd83391410fbf012f1de366d2463c)
This is good in general (see how the other libraries also have long had
it, since 49fe9592a4) but in particular
needed to fix the NetBSD build.
(cherry picked from commit b23273f6a29c725646b3523b1c35a0ae4a84ef61)
Today, with the tests inside a `tests` intermingled with the
corresponding library's source code, we have a few problems:
- We have to be careful that wildcards don't end up with tests being
built as part of Nix proper, or test headers being installed as part
of Nix proper.
- Tests in libraries but not executables is not right:
- It means each executable runs the previous unit tests again, because
it needs the libraries.
- It doesn't work right on Windows, which doesn't want you to load a
DLL just for the side global variable . It could be made to work
with the dlopen equivalent, but that's gross!
This reorg solves these problems.
There is a remaining problem which is that sibbling headers (like
`hash.hh` the test header vs `hash.hh` the main `libnixutil` header) end
up shadowing each other. This PR doesn't solve that. That is left as
future work for a future PR.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
(cherry picked from commit 91b6833686a6a6d9eac7f3f66393ec89ef1d3b57)
(cherry picked from commit a61e42adb528b3d40ce43e07c79368d779a8b624)
I think it is bad for these reasons when `tests/` contains a mix of
functional and integration tests
- Concepts is harder to understand, the documentation makes a good
unit vs functional vs integration distinction, but when the
integration tests are just two subdirs within `tests/` this is not
clear.
- Source filtering in the `flake.nix` is more complex. We need to
filter out some of the dirs from `tests/`, rather than simply pick
the dirs we want and take all of them. This is a good sign the
structure of what we are trying to do is not matching the structure
of the files.
With this change we have a clean:
```shell-session
$ git show 'HEAD:tests'
tree HEAD:tests
functional/
installer/
nixos/
```
(cherry picked from commit 68c81c737571794f7246db53fb4774e94fcf4b7e)
This reverts commit 5e3986f59c. This
un-implements RFC 92 but fixes the critical bug #9052 which many people
are hitting. This is a decent stop-gap until a minimal reproduction of
that bug is found and a proper fix can be made.
Mostly fixed#9052, but I would like to leave that issue open until we
have a regression test, so I can then properly fix the bug (unbreaking
RFC 92) later.
(cherry picked from commit 8440afbed756254784d9fea3eaab06649dffd390)
It was disabled in c6953d1ff6 because
a recent Nixpkgs bump brought in a new systemd which changed how
systemd-nspawn worked.
As far as I can tell, the issue was caused by this upstream systemd
commit:
b71a0192c0
Bind-mounting the host's `/sys` and `/proc` into the container's
`/run/host/{sys,proc}` fixes the issue and allows the test to succeed.
(cherry picked from commit 883092e3f78d4efb1066a2e24e343b307035a04c)
https://hydra.nixos.org/build/235888160
This is needed because Nixpkgs now contains dangling symlinks
(pkgs/test/nixpkgs-check-by-name/tests/symlink-invalid/pkgs/by-name/fo/foo/foo.nix).
This is broken because of a change in systemd in NixOS 23.05. It fails
with
Failed to mount proc (type proc) on /proc (MS_NOSUID|MS_NODEV|MS_NOEXEC ""): Operation not permitted
The Derivation parser and old ATerm unfortunately leaves few ways to get
nice errors when an old version of Nix encounters a new version of the
format. The most likely scenario for this to occur is with a new client
making a derivation that the old daemon it is communicating with cannot
understand.
The extensions we just created for dynamic derivation deps will add a
version field, solving the problem going forward, but there is still the
issue of what to do about old versions of Nix up to now.
The solution here is to carefully catch the bad error from the daemon
that is likely to indicate this problem, and add some extra context to
it.
There is another "Ugly backwards compatibility hack" in
`remote-store.cc` that also works by transforming an error.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
We use the same nested map representation we used for goals, again in
order to save space. We might someday want to combine with `inputDrvs`,
by doing `V = bool` instead of `V = std::set<OutputName>`, but we are
not doing that yet for sake of a smaller diff.
The ATerm format for Derivations also needs to be extended, in addition
to the in-memory format. To accomodate this, we added a new basic
versioning scheme, so old versions of Nix will get nice errors. (And
going forward, if the ATerm format changes again the errors will be even
better.)
`parsedStrings`, an internal function used as part of parsing
derivations in A-Term format, used to consume the final `]` but expect
the initial `[` to already be consumed. This made for what looked like
unbalanced brackets at callsites, which was confusing. Now it consumes
both which is hopefully less confusing.
As part of testing, we also created a unit test for the A-Term format for
regular non-experimental derivations too.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Apply suggestions from code review
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
To avoid dealing with an optional `drvPath` (because we might not know
it yet) everywhere, make an `CreateDerivationAndRealiseGoal`. This goal
just builds/substitutes the derivation file, and then kicks of a build
for that obtained derivation; in other words it does the chaining of
goals when the drv file is missing (as can already be the case) or
computed (new case).
This also means the `getDerivation` state can be removed from
`DerivationGoal`, which makes the `BasicDerivation` / in memory case and
`Derivation` / drv file file case closer together.
The map type is factored out for clarity, and because we will soon hvae
a second use for it (`Derivation` itself).
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
In the Nix language, given a drv path, we should be able to construct
another string referencing to one of its output. We can do this today
with `(import drvPath).output`, but this only works for derivations we
already have.
With dynamic derivations, however, that doesn't work well because the
`drvPath` isn't yet built: importing it like would need to trigger IFD,
when the whole point of this feature is to do "dynamic build graph"
without IFD!
Instead, what we want to do is create a placeholder value with the right
string context to refer to the output of the as-yet unbuilt derivation.
A new primop in the language, analogous to `builtins.placeholder` can be
used to create one. This will achieve all the right properties. The
placeholder machinery also will match out the `outPath` attribute for CA
derivations works.
In 60b7121d2c we added that type of
placeholder, and the derived path and string holder changes necessary to
support it. Then in the previous commit we cleaned up the code
(inspiration finally hit me!) to deduplicate the code and expose exactly
what we need. Now, we can wire up the primop trivally!
Part of RFC 92: dynamic derivations (tracking issue #6316)
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
We want to be able to write down `foo.drv^bar.drv^baz`:
`foo.drv^bar.drv` is the dynamic derivation (since it is itself a
derivation output, `bar.drv` from `foo.drv`).
To that end, we create `Single{Derivation,BuiltPath}` types, that are
very similar except instead of having multiple outputs (in a set or
map), they have a single one. This is for everything to the left of the
rightmost `^`.
`NixStringContextElem` has an analogous change, and now can reuse
`SingleDerivedPath` at the top level. In fact, if we ever get rid of
`DrvDeep`, `NixStringContextElem` could be replaced with
`SingleDerivedPath` entirely!
Important note: some JSON formats have changed.
We already can *produce* dynamic derivations, but we can't refer to them
directly. Today, we can merely express building or example at the top
imperatively over time by building `foo.drv^bar.drv`, and then with a
second nix invocation doing `<result-from-first>^baz`, but this is not
declarative. The ethos of Nix of being able to write down the full plan
everything you want to do, and then execute than plan with a single
command, and for that we need the new inductive form of these types.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This enables nix to correctly report what will be fetched in the case
that everything is a cache hit.
Note however that if an intermediate build of something which is not
cached could still cause products to end up being substituted if the
intermediate build results in a CA path which is in the cache.
Fixes#8615.
Signed-off-by: Peter Waller <p@pwaller.net>
I haven't checked when this was exactly introduced, but on Nix 2.16 I
realized that the additional lines inserted when using `--precise` are
completely separated from the tree:
nix why-depends /nix/store/ccgr4faaxys39s091qridxg1947lggh4-evcxr-0.14.2 /nix/store/b7hvml0m3qmqraz1022fwvyyg6fc1vdy-gcc-12.2.0 --precise --extra-experimental-features nix-command
/nix/store/ccgr4faaxys39s091qridxg1947lggh4-evcxr-0.14.2
→ /nix/store/lcf37pgp3rgww67v9x2990hbfwx96c1w-gcc-wrapper-12.2.0
→ /nix/store/b7hvml0m3qmqraz1022fwvyyg6fc1vdy-gcc-12.2.0
└───bin/evcxr: …':'}.PATH=${PATH/':''/nix/store/lcf37pgp3rgww67v9x2990hbfwx96c1w-gcc-wrapper-12.2.0/bin'':'/':'}…
└───bin/cpp: …k disable=SC2193.[[ "/nix/store/b7hvml0m3qmqraz1022fwvyyg6fc1vdy-gcc-12.2.0/bin/cpp" = *++ ]] &&…
This is apparently because `std::cout` is buffered and flushed in the
end whereas the rest of the output isn't. The fix is rather simple, just
use `logger->cout` as it's already the case for the rest of the code.
This way we also don't need to insert additional newlines in the `hits`
map since that's something the logger takes care of.
Also added a small test to make sure that the layout of this is somehow
tested to reduce the risk of further regressions here.
Special-casing the file name is rather ugly, so we shouldn't do
that. So now any {file,http,https} URL is handled by
TarballInputScheme, except for non-flake inputs (i.e. inputs that have
the attribute `flake = false`).
Over the last year or so I've run into several use cases where I need to
parse and/or serialize URLs for use by `builtins.fetchTree` or
`builtins.getFlake`, largely in order to produce _lockfile-like_ files
for lang2nix frameworks or tools which use `nix` internally to drive
builds.
I've gone through the painstaking process of emulating
`nix::FlakeRef::fromAttrs` and `nix::parseFlakeRef` several times with
mixed success; but these are difficult to create and even harder to
maintain if I hope to stay aligned with changes to the real
parser/serializer.
I understand why adding new `builtins` isn't something we want to do
flagrantly. I'm recommending this addition simply because I keep
encountering use cases where I need to parse/serialize these URIs in
`nix` expressions, and I want a reliable solution.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
Grouping our tests should make it easier to understand the intent than
one long poorly-arranged list. It also is convenient for running just
the tests for a specific component when working on that component.
We need at least one test group so this isn't dead code; I decided to
collect the tests for the `ca-derivations` and `dynamic-derivations`
experimental features in groups. Do
```bash
make ca.test-group -jN
```
and
```bash
make dyn-drv.test-group -jN
```
to try running just them.
I originally did this as part of #8397 for being able to just the local
overlay store alone. I am PRing it separately now so we can separate
general infra from new features.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
We were bedeviled by sandboxing issues when working on the layered
store. The problem ended up being that when we have nested nix builds,
and the inner store is inside the build dir (e.g. store is
`/build/nix-test/$name/store`, build dir is `/build`) bind mounts
clobber each other and store paths cannot be found.
After thoroughly cleaning up `local-derivation-goal.cc`, we might be
able to make that work. But that is a lot of work. For now, we just fail
earlier with a proper error message.
Finally, test this: nested sandboxing without the problematic store dir
should work, and with should fail with the expected error message.
Co-authored-by: Dylan Green <67574902+cidkidnix@users.noreply.github.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
When we pipe to `>(...)` like that, we unfortunately don't wait for the
process to finish. Better to just substitute the file.
Also, use the "unified" diff output that people (including myself) are
more familiar with, thanks to Git.
* Lang now verifies errors and parse output
* Some new miscellaneous tests
* Easy way to update the tests
* Document workflow in manual
* Use `!` not `~` as separater char for sed
It is confusing to use `~` when we are talking about paths and home
directories!
* Test test suite itself (`test/lang-test/infra.sh`)
Additionally, run shellcheck on `tests/lang.sh` to help ensure it is
correct, now that is is more complex.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
When explicitly requested by the caller, as suggested in the meeting
(https://github.com/NixOS/nix/pull/8090#issuecomment-1531139324)
> @edolstra: { toPath } vs { fromPath } is too implicit
I've opted for the `inputAddressed = true` requirement, because it
we did not agree on renaming the path attributes.
> @roberth: more explicit
> @edolstra: except for the direction; not immediately clear in which direction the rewriting happens
This is in fact the most explicit syntax and a bit redundant, which is
good, because that redundancy lets us deliver an error message that
reminds expression authors that CA provides a better experience to
their users.
* nix flake check: improve error message if overlay is not a lambda
Suppose you have an overlay like this
{
inputs = { /* ... */ };
outputs = { flake-utils, ... }: flake-utils.lib.eachDefaultSystem
(system: {
overlays.default = final: prev: {
};
});
}
then `nix flake check` (correctly) fails because `overlays` are supposed
to have the structure `overlays.<name> = final: prev: exp`. However, the
error-message is a little bit counter-intuitive:
error: overlay does not take an argument named 'final'
While one might guess where the error actually comes from because the
trace above says `… while checking the overlay 'overlays.x86_64-linux'`
this is still pretty confusing because it complains about an argument
not being named `final` even though that's evidently the case.
With this change, the error-message actually makes it clear what's
wrong:
[ma27@carsten:~/Projects/nix/tmp]$ nix flake check --extra-experimental-features 'nix-command flakes' path:$(pwd)
error:
… while checking flake output 'overlays'
at /nix/store/clgblnxx003hyrq8qkz5ab6kgqkck6qc-source/flake.nix:4:5:
3| outputs = { ... }: {
4| overlays.x86_64-linux.snens = final: prev: {
| ^
5| kek = throw "snens";
… while checking the overlay 'overlays.x86_64-linux'
at /nix/store/clgblnxx003hyrq8qkz5ab6kgqkck6qc-source/flake.nix:4:5:
3| outputs = { ... }: {
4| overlays.x86_64-linux.snens = final: prev: {
| ^
5| kek = throw "snens";
error: overlay is not a lambda, but a set instead
- Improved API docs from comment
- Exit codes are for `nix-build`, not just `nix-store --release`
- Make note in tests so the magic numbers are not surprising
Picking up where #8387 left off.
Previously it was not possible to open a local store when its database is on a read-only filesystem. Obviously a store on a read-only filesystem cannot be modified, but it would still be useful to be able to query it.
This change adds a new read-only setting to LocalStore. When set to true, Nix will skip operations that fail when the database is on a read-only filesystem (acquiring big-lock, schema migration, etc), and the store database will be opened in immutable mode.
Co-authored-by: Ben Radford <benradf@users.noreply.github.com>
Co-authored-by: cidkidnix <cidkidnix@protonmail.com>
Co-authored-by: Dylan Green <67574902+cidkidnix@users.noreply.github.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
A library shouldn't require changes to the caller's argument handling,
especially if it doesn't have to, and indeed we don't have to.
This changes the lookup order to prioritize the hardcoded path to nix
if it exists. The static executable still finds itself through /proc
and the like.
The remaining constructor RegisterPrimOp::RegisterPrimOp(Info && info)
allows specifying the documentation in .args and .doc members of the
Info structure.
Commit 8ec1ba0210 removed all uses of the removed constructor in the
nix binary. Here, we remove the constructor completely as well as its
use in a plugin test. According to #8515, we didn't promis to maintain
compatibility with external plugins.
Fixes#8515
Previously, for tarball flakes, we recorded the original URL of the
tarball flake, rather than the URL to which it ultimately
redirects. Thus, a flake URL like
http://example.org/patchelf-latest.tar that redirects to
http://example.org/patchelf-<revision>.tar was not really usable. We
couldn't record the redirected URL, because sites like GitHub redirect
to CDN URLs that we can't rely on to be stable.
So now we use the redirected URL only if the server returns the
`x-nix-is-immutable` or `x-amz-meta-nix-is-immutable` headers in its
response.
Currently `fromTOML` throws an exception when encountering a timestamp
since the Nix language lacks a way to represent them.
This patch changes this beaviour and makes `fromTOML` parse timestamps as
attrsets of the format
{ _type = "timestamp"; value = "1979-05-27T07:32:00Z"; }
This is guarded by an experimental feature flag to leave room for iterating on the representation.
The primop `builtins.replaceStrings` currently always strictly evaluates the
replacement strings, however time and space are wasted for their computation
if the corresponding pattern do not occur in the input string. This commit
makes the evaluation of the replacement strings lazy by deferring their
evaluation to when the corresponding pattern are matched and memoize the result
for efficient retrieval on subsequent matches.
The testcases for replaceStrings was updated to check for lazy evaluation
of the replacements. A note was also added in the release notes to
document the behavior change.
- If the element comes from a flake, print the full flakeref (with the
fragment part) and not just the reference to the flake itself
- If the element doesn't come from a flake, print its store path(s)
This is a bit too verbose, but has the advantages of being correct (and
not crashing), so it's strictly better than the previous situation
Fix https://github.com/NixOS/nix/issues/8284
As discussed in #7417, it would be good to make more string values work
as installables. That is to say, if an installable refers to a value,
and the value is a string, it used to not work at all, since #7484, it
works somewhat, and this PR make it work some more.
The new cases that are added for `BuiltPath` contexts:
- Fixed input- or content-addressed derivation:
```
nix-repl> hello.out.outPath
"/nix/store/jppfl2bp1zhx8sgs2mgifmsx6dv16mv2-hello-2.12"
nix-repl> :p builtins.getContext hello.out.outPath
{ "/nix/store/c7jrxqjhdda93lhbkanqfs07x2bzazbm-hello-2.12.drv" = { outputs = [ "out" ]; }; }
The string matches the specified single output of that derivation, so
it should also be valid.
- Floating content-addressed derivation:
```
nix-repl> (hello.overrideAttrs (_: { __contentAddressed = true; })).out.outPath
"/1a08j26xqc0zm8agps8anxpjji410yvsx4pcgyn4bfan1ddkx2g0"
nix-repl> :p builtins.getContext (hello.overrideAttrs (_: { __contentAddressed = true; })).out.outPath
{ "/nix/store/qc645pyf9wl37c6qvqzaqkwsm1gp48al-hello-2.12.drv" = { outputs = [ "out" ]; }; }
```
The string is not a path but a placeholder, however it also matches
the context, and because it is a CA derivation we have no better
option. This should also be valid.
We may also want to think about richer attrset based values (also
discussed in that issue and #6507), but this change "completes" our
string-based building blocks, from which the others can be desugared
into or at least described/document/taught in terms of.
Progress towards #7417
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Fixes#8309
This regression was because both `CmdDevelop` and `CmdPrintDevEnv` were
switched to be `InstallableValueCommand` subclasses, but actually
neither should have been.
The `nixpkgsFlakeRef` method should indeed not be on the base
installable class, because "flake refs" and "nixpkgs" are not
installable-wide notions, but that doesn't mean these commands should
only accept installable values.
This fixes a bug in commands like `nix eval' which would emit invalid attribute
sets if they contained reserved keywords such as "assert", "let", etc.
These keywords will not be quoted when printed, making them valid expressions.
All keywords recognized by the lexer are quoted except "or", which does not
require quotation.
fe5509df caused only wanted outputs to be passed to the
post-build-hook, which resulted in paths being built
without ever going into the hook.
This commit adds a (currently failing) test for this.
Previously, we relied on the `shutdown()` function to terminate `accept()`
calls on a listening socket. However, this approach did not work on macOS as
the waiting `accept()` call is not considered a connected socket, resulting in
an `ENOTCONN` error. Instead, we now close the listening socket to terminate
the `accept()` call.
Additionally, we fixed a resource management issue where we set the
`daemonSocket` variable to -1, triggering resource cleanup and causing the
`stopDaemon` function to be called twice. This resulted in errors as the socket
was already closed by the time the second `stopDaemon` call was made. Instead of
setting `daemonSocket` to -1, we now release the socket using the `release()`
method on a unique pointer. This properly transfers ownership and allows for
correct resource cleanup.
These changes ensure proper behavior and resource management for the
recursive-nix feature on macOS.
We finally test the status quo of remote build trust in a number of
ways. We create a new experimental feature on `nix-daemon` to do so.
PR #3921, which improves the situation with trustless remote building,
will build upon these changes. This code / tests was pull out of there
to make this, so everything is easier to review, and in particular we
test before and after so the new behavior in that PR is readily apparent
from the testsuite diff alone.
Issues:
1. Features gated on disabled experimental settings should warn and be
ignored, not silently succeed.
2. Experimental settings in the same config "batch" (file or env var)
as the enabling of the experimental feature should work.
3. For (2), the order should not matter.
These are analogous to the issues @roberth caught with my changes for
arg handling, but they are instead for config handling.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This is somewhat hacky fix just for 2.15. I unintentionally hid them
from the manual, when no one wanted to hide them that (including
myself). I also required the experimental feature to be enabled in an
order-dependent way, which is not good.
The simplest fix for this immanent release is just to always show them,
and always allow them to be set.
Effectively undoes some changes from aa663b7e89
This function returns true or false depending on whether the Nix client
is trusted or not. Mostly relevant when speaking to a remote store with
a daemon.
We include this information in `nix ping store` and `nix doctor`
Co-Authored-By: John Ericson <John.Ericson@Obsidian.Systems>
This introduces the SourcePath type from lazy-trees as an abstraction
for accessing files from inputs that may not be materialized in the
real filesystem (e.g. Git repositories). Currently, however, it's just
a wrapper around CanonPath, so it shouldn't change any behaviour. (On
lazy-trees, SourcePath is a <InputAccessor, CanonPath> tuple.)
Prior to this, there was an ad-hoc whitelist in `main.cc`. Now, every
command states its stability.
In a future PR, we will adjust the manual to take advantage of this new
information in the JSON.
(It will be easier to do that once we have some experimental feature
docs to link too; see #5930 and #7798.)
Was probably an overlook of when the tests were first added, but that
now messes-up with the `nix-channel --update` that happens down the line
(and can't access the network since we're inside a Nix build)
See the note in the test.
We don't want these flags showing up for commands where they are
irrelevant.
Eventually, this needs a proper fix, but it need not be a blocker for
stabilize: for a quick-n-dirty punt, just put these flags behind the
`nix-command` unstable feature.
This is fine because they are only relevant for commands which we don't
need to stabilize for a while.
`legacyPackages` of nixpkgs trigger eval errors in `hasContent`, causing
the whole `legacyPackages` being skipped. We should treat it as
has-content in that case.
I noticed a regression in the lazy-trees branch, which I'm trying to
capture with this test. While the tests succeeds in master, the
lazy-trees branch gives the following error message:
error: access to path
'/build/nix-test/tests/flakes/flake-in-submodule/rootRepo/submodule/flake.nix'
is forbidden because it is not under Git control; maybe you should
'git add' it to the repository
'/build/nix-test/tests/flakes/flake-in-submodule/rootRepo'?
- Try not to put cryptic "99" in many places
Factor out `exit 99` into `skipTest` function
- Alows make sure skipping a test is done with a reason
`skipTest` takes a mandatory argument
- Separate pure conditionals vs side-effectful test skipping.
"require daemon" already had this, but "sandbox support" did not.
Add the --base64 and --sri flags for the Base64 and SRI format output.
Add the --base16 flag to explicitly specify the hexadecimal format.
Add the --to-base64 and --to-sri flag to convert a hash to the above
mentioned format.
Use `set -u` and `set -o pipefail` to catch accidental mistakes and
failures more strongly.
- `set -u` catches the use of undefined variables
- `set -o pipefail` catches failures (like `set -e`) earlier in the
pipeline.
This makes the tests a bit more robust. It is nice to read code not
worrying about these spurious success paths (via uncaught) errors
undermining the tests. Indeed, I caught some bugs doing this.
There are a few tests where we run a command that should fail, and then
search its output to make sure the failure message is one that we
expect. Before, since the `grep` was the last command in the pipeline
the exit code of those failing programs was silently ignored. Now with
`set -o pipefail` it won't be, and we have to do something so the
expected failure doesn't accidentally fail the test.
To do that we use `expect` and a new `expectStderr` to check for the
exact failing exit code. See the comments on each for why.
`grep -q` is replaced with `grepQuiet`, see the comments on that
function for why.
`grep -v` when we just want the exit code is replaced with `grepInverse,
see the comments on that function for why.
`grep -q -v` together is, surprise surprise, replaced with
`grepQuietInverse`, which is both combined.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
The release notes document the change in behavior, I don't include it
here so there is no risk to it getting out of sync.
> Motivation
>> Plumbing CLI should be simple
Store derivation installations are intended as "plumbing": very simple
utilities for advanced users and scripts, and not what regular users
interact with. (Similarly, regular Git users will use branch and tag
names not explicit hashes for most things.)
The plumbing CLI should prize simplicity over convenience; that is its
raison d'etre. If the user provides a path, we should treat it the same
way not caring what sort of path it is.
>> Scripting
This is especially important for the scripting use-case. when arbitrary
paths are sent to e.g. `nix copy` and the script author wants consistent
behavior regardless of what those store paths are. Otherwise the script
author needs to be careful to filter out `.drv` ones, and then run `nix
copy` again with those paths and `--derivation`. That is not good!
>> Surprisingly low impact
Only two lines in the tests need changing, showing that the impact of
this is pretty light.
Many command, like `nix log` will continue to work with just the
derivation passed as before. This because we used to:
- Special case the drv path and replace it with it's outputs (what this
gets rid of).
- Turn those output path *back* into the original drv path.
Now we just skip that entire round trip!
> Context
Issue #7261 lays out a broader vision for getting rid of `--derivation`,
and has this as one of its dependencies. But we can do this with or
without that.
`Installable::toDerivations` is changed to handle the case of a
`DerivedPath::Opaque` ending in `.drv`, which is new: it simply doesn't
need to do any extra work in that case. On this basis, commands like
`nix {show-derivation,log} /nix/store/...-foo.drv` still work as before,
as described above.
When testing older daemons, the post-build-hook will be run against the
old CLI, so we need the old version of the post-build-hook to support
that use-case.
Co-authored-by: Travis A. Everett <travis.a.everett@gmail.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Split `common.sh` into the vars and functions definitions vs starting
the daemon (and possibly other initialization logic). This way,
`init.sh` can just `source` the former. Trying to start the daemon
before `nix.conf` is written will fail because `nix daemon` requires
`--experimental-features 'nix-command'`.
`killDaemon` is idempotent, so it's safe to call when no daemon is
running.
`startDaemon` and `killDaemon` use the PID (which is now exported to
subshells) to decide whether there is work to be done, rather than
`NIX_REMOTE`, which might conceivably be set differently even if a
daemon is running.
`startDaemon` and `killDaemon` can save/restore the old `NIX_REMOTE` as
`NIX_REMOTE_OLD`.
`init.sh` kills daemon before deleting everything (including the daemon
socket).
`init.sh` is tested on its own. We used to do that. I deleted it in
4720853129 but I am not sure why. Better
to just restore it; at one point working on this every other test
passed, so seems good to check whether `init.sh` can be run twice.
We don't *need* to run `init.sh` twice, but I want to try to make our
tests as robust as possible so that manual debugging (where tests for
better or worse might be run ways that we didn't expect) is less
fragile.
It would be incorrect to say that the `sourceInfo` has an `outPath`
that isn't the root. `sourceInfo` is about the root, whereas only
the flake may not be about the root. Thanks Eelco for pointing that
out.
- `nixpkgsFor` does all of native, static, cross, and the different stdenvs.
- The main Nix derivation is no longer duplicated for static.
- DRY nixpkgs.lib and lib.genAttrs calls.
Adding a test to ensure there is no regression.
The tests that are split out of `tests/build.sh` are ones that don't yet
work with CA derivation. I have not yet evaluated whether they should or
not.
This behavior, reported missing in issue #4661, already got fixed in
PR #4818, but didn't get a test case then.
XDG Base Directory is a standard for locations for storing various
files. Nix has a few files which seem to fit in the standard, but
currently use a custom location directly in the user's ~, polluting
it:
- ~/.nix-profile
- ~/.nix-defexpr
- ~/.nix-channels
This commit adds a config option (use-xdg-base-directories) to follow
the XDG spec and instead use the following locations:
- $XDG_STATE_HOME/nix/profile
- $XDG_STATE_HOME/nix/defexpr
- $XDG_STATE_HOME/nix/channels
If $XDG_STATE_HOME is not set, it is assumed to be ~/.local/state.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
Co-authored-by: Tim Fenney <kodekata@gmail.com>
Co-authored-by: pasqui23 <pasqui23@users.noreply.github.com>
Co-authored-by: Artturin <Artturin@artturin.com>
Co-authored-by: John Ericson <Ericson2314@Yahoo.com>
For frameworks it's important that structures are as lazy as possible
to prevent infinite recursions, performance issues and errors that
aren't related to the thing to evaluate. As a consequence, they have
to emit more attributes than strictly (sic) necessary.
However, these attributes with empty values are not useful to the user
so we omit them.
Previously, getDefaultNixPath was called too early: at initialisation
time, before CLI and config have been processed, when `restrictEval` and
`pureEval` both have their default value `false`. Call it when
initialising the EvalState instead, and use `setDefault`.
Add an `$` at the end of the `grep` regex. Without it, `checkRef foo`
would always imply `checkRef foo.drv`. We want to tell these situations
apart to more precisely test what is going on.
Allows checking directory entry type of a single file/directory.
This was added to optimize the use of `builtins.readDir` on some
filesystems and operating systems which cannot detect this information
using POSIX's `readdir`.
Previously `builtins.readDir` would eagerly use system calls to lookup
these filetypes using other interfaces; this change makes these
operations lazy in the attribute values for each file with application
of `builtins.readFileType`.
The original `builtins.getContext` test from
1d757292d0 would have caught this. The
problem is that b30be6b450 adding
`builtins.appendContext` modified that test to make it test too much at
once, rather than adding a separate test.
We now have isolated tests for both functions, and also a property test
showing everything put together (in the form of an eta rule for strings
with context). This is better coverage and properly reproduces the bug.
Rather than using `/nix/var/nix/{profiles,gcroots}/per-user/`, put the user
profiles and gcroots under `$XDG_DATA_DIR/nix/{profiles,gcroots}`.
This means that the daemon no longer needs to manage these paths itself
(they are fully handled client-side). In particular, it doesn’t have to
`chown` them anymore (removing one need for root).
This does change the layout of the gc-roots created by nix-env, and is
likely to break some stuff, so I’m not sure how to properly handle that.
Prior to this change, we had a bunch of ad-hoc string manipulation code
scattered around. This made it hard to figure out what data model for
string contexts is.
Now, we still store string contexts most of the time as encoded strings
--- I was wary of the performance implications of changing that --- but
whenever we parse them we do so only through the
`NixStringContextElem::parse` method, which handles all cases. This
creates a data type that is very similar to `DerivedPath` but:
- Represents the funky `=<drvpath>` case as properly distinct from the
others.
- Only encodes a single output, no wildcards and no set, for the
"built" case.
(I would like to deprecate `=<path>`, after which we are in spitting
distance of `DerivedPath` and could maybe get away with fewer types, but
that is another topic for another day.)
Adds a new boolean structured attribute
`outputChecks.<output>.unsafeDiscardReferences` which disables scanning
an output for runtime references.
__structuredAttrs = true;
outputChecks.out.unsafeDiscardReferences = true;
This is useful when creating filesystem images containing their own embedded Nix
store: they are self-contained blobs of data with no runtime dependencies.
Setting this attribute requires the experimental feature
`discard-references` to be enabled.
Without the change checks issue the fllowing warning:
$ nix flake check
trace: warning: The option `nix.useSandbox' defined in `makeTest parameters' has been renamed to `nix.settings.sandbox'.
trace: warning: The option `nix.useSandbox' defined in `makeTest parameters' has been renamed to `nix.settings.sandbox'.
trace: warning: The option `nix.maxJobs' defined in `makeTest parameters' has been renamed to `nix.settings.max-jobs'.
...
First, logic is consolidated in the shell script instead of being spread
between them and makefiles. That makes understanding what is going on a
little easier.
This would not be super interesting by itself, but it gives us a way to
debug tests more easily. *That* in turn I hope is much more compelling.
See the updated manual for details.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This makes 'nix build' work on paths (which will be copied to the
store) and store paths (returned as is). E.g. the following flake
output attributes can be built using 'nix build .#foo':
foo = ./src;
foo = self.outPath;
foo = builtins.fetchTarball { ... };
foo = (builtins.fetchTree { .. }).outPath;
foo = builtins.fetchTree { .. } + "/README.md";
foo = builtins.storePath /nix/store/...;
Note that this is potentially risky, e.g.
foo = /.;
will cause Nix to try to copy the entire file system to the store.
What doesn't work yet:
foo = self;
foo = builtins.fetchTree { .. };
because we don't handle attrsets with an outPath attribute in it yet,
and
foo = builtins.storePath /nix/store/.../README.md;
since result symlinks have to point to a store path currently (rather
than a file inside a store path).
Fixes#7417.
This makes the position object used in exceptions abstract, with a
method getSource() to get the source code of the file in which the
error originated. This is needed for lazy trees because source files
don't necessarily exist in the filesystem, and we don't want to make
libutil depend on the InputAccessor type in libfetcher.
Fix#6209
When trying to run `nix log <installable>`, try first to resolve the derivation pointed to
by `<installable>` as it is the resolved one that holds the build log.
This has a couple of shortcomings:
1. It’s expensive as it requires re-reading the derivation
2. It’s brittle because if the derivation doesn’t exist anymore or can’t
be resolved (which is the case if any one of its build inputs is missing),
then we can’t access the log anymore
However, I don’t think we can do better (at least not right now).
The alternatives I see are:
1. Copy the build log for the un-resolved derivation. But that means a
lot of duplication
2. Store the results of the resolving in the db. Which might be the best
long-term solution, but leads to a whole new class of potential
issues.
eldritch horrors
Robert Hensing
Maximilian Bosch
Yorick
Linus Heckemann
Lazar Bodor
Bob van der Linden
Andrea Ciceri