The `post-build-hook` text currently appears in the index, but not on the actual title line of the section, this follows the pattern used in a previous section to get a reference into a title.
With the merge of #2582, the syntax "tags/1.9" for refs does not work
anymore.
However, the new syntax "refs/tags/1.9" seems to support annotated tags,
such as "refs/tags/2.0".
Closes#2385.
With this patch, and this file I called `log.py`:
#!/usr/bin/env nix-shell
#!nix-shell -i python3 -p python3 --pure
import sys
from pprint import pprint
stack = []
timestack = []
for line in open(sys.argv[1]):
components = line.strip().split(" ", 2)
if components[0] != "function-trace":
continue
direction = components[1]
components = components[2].rsplit(" ", 2)
loc = components[0]
_at = components[1]
time = int(components[2])
if direction == "entered":
stack.append(loc)
timestack.append(time)
elif direction == "exited":
dur = time - timestack.pop()
vst = ";".join(stack)
print(f"{vst} {dur}")
stack.pop()
and:
nix-instantiate --trace-function-calls -vvvv ../nixpkgs/pkgs/top-level/release.nix -A unstable > log.matthewbauer 2>&1
./log.py ./log.matthewbauer > log.matthewbauer.folded
flamegraph.pl --title matthewbauer-post-pr log.matthewbauer.folded > log.matthewbauer.folded.svg
I can make flame graphs like: http://gsc.io/log.matthewbauer.folded.svg
---
Includes test cases around function call failures and tryEval. Uses
RAII so the finish is always called at the end of the function.
Make curl's low speed limit configurable via stalled-download-timeout.
Before, this limit was five minutes without receiving a single byte.
This is much too long as if the remote end may not have even
acknowledged the HTTP request.
Passing `--post-build-hook /foo/bar` to a nix-* command will cause
`/foo/bar` to be executed after each build with the following
environment variables set:
DRV_PATH=/nix/store/drv-that-has-been-built.drv
OUT_PATHS=/nix/store/...build /nix/store/...build-bin /nix/store/...build-dev
This can be useful in particular to upload all the builded artifacts to
the cache (including the ones that don't appear in the runtime closure
of the final derivation or are built because of IFD).
This new feature prints the stderr/stdout output to the `nix-build`
and `nix build` client, and the output is printed in a Nix 2
compatible format:
[nix]$ ./inst/bin/nix-build ./test.nix
these derivations will be built:
/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv
building '/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv'...
hello!
bye!
running post-build-hook '/home/grahamc/projects/github.com/NixOS/nix/post-hook.sh'...
post-build-hook: + sleep 1
post-build-hook: + echo 'Signing paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: Signing paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: + sleep 1
post-build-hook: + echo 'Uploading paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: Uploading paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: + sleep 1
post-build-hook: + printf 'very important stuff'
/nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
[nix-shell:~/projects/github.com/NixOS/nix]$ ./inst/bin/nix build -L -f ./test.nix
my-example-derivation> hello!
my-example-derivation> bye!
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + echo 'Signing paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> Signing paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + echo 'Uploading paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> Uploading paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + printf 'very important stuff'
[1 built, 0.0 MiB DL]
Co-authored-by: Graham Christensen <graham@grahamc.com>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
And probably many other distributions.
Until now, ./configure would fail silently printing a warning
./configure: line 4621: AX_CXX_COMPILE_STDCXX_17: command not found
and then continuing, later failing with a C++ #error saying that some C++11
feature isn't supported (it didn't even get to the C++17 features).
This is because older distributions don't come with the
`AX_CXX_COMPILE_STDCXX_17` m4 macro.
This commit vendors that macro accordingly.
Now ./configure complains correctly:
configure: error: *** A compiler with support for C++17 language features is required.
On Ubuntu 16.04, ./configure completes if a newer compiler is used, e.g. with
gcc-7 from https://launchpad.net/~ubuntu-toolchain-r/+archive/ubuntu/test
using:
./bootstrap.sh
./configure CXX=g++-7 --disable-doc-gen --with-boost=$(nix-build --no-link '<nixpkgs>' -A boost.dev)
And probably other Linux distributions with long-term support releases.
Also update manual stating what version is needed;
I checked that 1.14 is the oldest version with which current nix compiles,
and added autoconf feature checks for some functions added in that release
that nix uses.
In `args@{ a ? 1 }: /* ... */` the value `a` won't be a part of `args`
unless it's specified when calling the function, the default value will
be ignored in this case.
My personal point of view is that this behavior is a matter of taste, at
least I was pretty sure that unmatched arguments will be a part of
`args@` while debugging some Nix code last week.
I decided to add a warning to the docs which hopefully reduces the
confusion of further Nix developers who thought the same about `args@`.
For text files it is possible to do it like so:
`builtins.hashString "sha256" (builtins.readFile /tmp/a)`
but that doesn't work for binary files.
With builtins.hashFile any kind of file can be conveniently hashed.
Inside a derivation, exportReferencesGraph already provides a way to
dump the Nix database for a specific closure. On the command line,
--dump-db gave us the same information, but only for the entire Nix
database at once.
With this change, one can now pass a list of paths to --dump-db to get
the Nix database dumped for just those paths. (The user is responsible
for ensuring this is a closure, like for --export).
Among other things, this is useful for deploying a closure to a new
host without using --import/--export; one can use tar to transfer the
store paths, and --dump-db/--load-db to transfer the validity
information. This is useful if the new host doesn't actually have Nix
yet, and the closure that is being deployed itself contains Nix.
- The instructions for using nix-shell as an interpreter has a Haskell script
example that doesn't work on more recent versions of Nix. Update the
instructions with a working command
This prints the references graph of the store paths in the graphML
format [1]. The graphML format is supported by several graph tools
such as the Python Networkx library or the Apache Thinkerpop project.
[1] http://graphml.graphdrawing.org
`fetchurl` will now throw if given an `md5`, and the hashes have generally
been upgraded to avoid it and use `sha256` as a default. This updates the
documentation examples in the manual accordingly.
This removes confusing documentation. It's better to remove doc than add implementation, because Nix 1.12 will surely have new GC interface anyway.
Fixes https://github.com/NixOS/nix/issues/641
While trying to understand garbage collection it was not immediately
clear that only the runtime dependency closure of output paths
would be kept (instead of the build-time dependency closure).
This commit attempts to clarify this by expanding some of the
glossary definitions and extending the Garbage Collection
section.
The overhead of sandbox builds is a problem on NixOS (since building a
NixOS configuration involves a lot of small derivations) but not for
typical non-NixOS use cases. So outside of NixOS we can enable it.
Issue #179.
builtins.path allows specifying the name of a path (which makes paths
with store-illegal names now addable), allows adding paths with flat
instead of recursive hashes, allows specifying a filter (so is a
generalization of filterSource), and allows specifying an expected
hash (enabling safe path adding in pure mode).
Instead, if a fixed-output derivation produces has an incorrect output
hash, we now unconditionally move the outputs to the path
corresponding with the actual hash and register it as valid. Thus,
after correcting the hash in the Nix expression (e.g. in a fetchurl
call), the fixed-output derivation doesn't have to be built again.
It would still be good to have a command for reporting the actual hash
of a fixed-output derivation (instead of throwing an error), but
"nix-build --hash" didn't do that.
Following discussion with Shea and Graham. It's a big enough change
from the last release. Also, from a semver perspective, 2.0 makes more
sense because we did remove some interfaces (like nix-pull/nix-push).
The name had become a misnomer since it's not only for substitution
from binary caches, but when adding/copying any
(non-content-addressed) path to a store.
Nix can now automatically run the garbage collector during builds or
while adding paths to the store. The option "min-free = <bytes>"
specifies that Nix should run the garbage collector whenever free
space in the Nix store drops below <bytes>. It will then delete
garbage until "max-free" bytes are available.
Garbage collection during builds is asynchronous; running builds are
not paused and new builds are not blocked. However, there also is a
synchronous GC run prior to the first build/substitution.
Currently, no old GC roots are deleted (as in "nix-collect-garbage
-d").
In particular, drop the "build-" and "gc-" prefixes which are
pointless. So now you can say
nix build --no-sandbox
instead of
nix build --no-build-use-sandbox
This removes the file nix-mode.el from Nix. The file is now available within the
repository https://github.com/NixOS/nix-mode.
Fixes#662Fixes#1040Fixes#1054Fixes#1055Closes#1119Fixes#1419
NOTE: all of the above should be fixed within NixOS/nix-mode. If one of those
hasn’t please reopen within NixOS/nix-mode and not within NixOS/nix.
This allows builds to call setuid binaries. This was previously
possible until we started using seccomp. Turns out that seccomp by
default disallows processes from acquiring new privileges. Generally,
any use of setuid binaries (except those created by the builder
itself) is by definition impure, but some people were relying on this
ability for certain tests.
Example:
$ nix build '(with import <nixpkgs> {}; runCommand "foo" {} "/run/wrappers/bin/ping -c 1 8.8.8.8; exit 1")' --no-allow-new-privileges
builder for ‘/nix/store/j0nd8kv85hd6r4kxgnwzvr0k65ykf6fv-foo.drv’ failed with exit code 1; last 2 log lines:
cannot raise the capability into the Ambient set
: Operation not permitted
$ nix build '(with import <nixpkgs> {}; runCommand "foo" {} "/run/wrappers/bin/ping -c 1 8.8.8.8; exit 1")' --allow-new-privileges
builder for ‘/nix/store/j0nd8kv85hd6r4kxgnwzvr0k65ykf6fv-foo.drv’ failed with exit code 1; last 6 log lines:
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=46 time=15.2 ms
Fixes#1429.
This is to simplify remote build configuration. These environment
variables predate nix.conf.
The build hook now has a sensible default (namely build-remote).
The current load is kept in the Nix state directory now.
This portion of the quick start guide may lead to confusion for
newcomers to Nix. This change clarifies the example to one that can be
copied in its entirety.
This allows various Store implementations to provide different ways to
get build logs. For example, BinaryCacheStore can get the build logs
from the binary cache.
Also, remove the log-servers option since we can use substituters for
this.
"build-max-jobs" and the "-j" option can now be set to "auto" to use
the number of CPUs in the system. (Unlike build-cores, it doesn't use
0 to imply auto-configuration, because a) magic values are a bad idea
in general; b) 0 is a legitimate value used to disable local
building.)
Fixes#1198.
The current behaviour modifies the first writeable file from amongst
.bash_profile, .bash_login and .profile. So .bash_profile (if it is
writable) would be modified even if a user has already sourced nix.sh
in, say, .profile.
This commit introduces a new environment variable,
NIX_INSTALLER_NO_MODIFY_PROFILE. If this is set during installation,
then the modifications are unconditionally skipped.
This is useful for users who have a manually curated set of dotfiles
that they are porting to a new machine. In such scenarios, nix.sh is
already sourced at a place where the user prefers. Without this
change, the nix installer would insist on modifying .bash_profile if
it exists.
This commit also add documentations for both the current behaviour and
the new override.
For example, you can now set
build-sandbox-paths = /dev/nvidiactl?
to specify that /dev/nvidiactl should only be mounted in the sandbox
if it exists in the host filesystem. This is useful e.g. for EC2
images that should support both CUDA and non-CUDA instances.
It's a slight misnomer now because it actually limits *all* downloads,
not just binary cache lookups.
Also add a "enable-http2" option to allow disabling use of HTTP/2
(enabled by default).
Once upon a time, I wrote my bachelors thesis about functional
deployment mechanisms.
I had to evaluate several szenarios where package management and
deployment were relevant. One szenario was to do distributed builds
over several machines.
I told myself: Weee, nix can do this! And with nix, this is actually
save, as you do not have side effects when building!
So I started. I use a cloud to set up four virtual machines where I
wanted to do the build. A fifth machine was used as master to distribute
the builds. All was good.
I created the necessary SSH keys, made sure every machine was reachable
by the master and configured the build in my remotes.conf.
When I started to try to build weechat from source, the build failed. It
failed, telling me
error: unable to start any build; either increase ‘--max-jobs’ or enable distributed builds
And I started to dig around. I digged long and good. But I wasn't able
to find the issue.
I double and triple checked my environment variables, my settings, the
SSH key and everything.
I reached out to fellow Nixers by asking on the nixos IRC channel. And I
got help. But we weren't able to find the issue, either.
So I became frustrated. I re-did all the environment variables.
And suddenly,... it worked! What did I change? Well... I made the
environment variables which contained pathes contain absolute pathes
rather than relatives.
And because I like to share my knowledge, this should be put into the
documentation, so others do not bang their heads against the wall
because something is not documented somewhere.
Docbook XSL got updated to version 1.79.1 in NixOS/nixpkgs@fb893a8 and
we're still referring to the hardcoded previous version.
So instead of just updating this to 1.79.1 we're going to use "current"
in the hope that this won't happen again.
I have tested this by building the manual under Nix(OS) but I haven't
tested this in a non-Nix environment, so I'm not sure whether this could
have implications.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra
The existing "nix-build" examples were failing:
error: cannot auto-call a function that has an argument without a default value (‘system’)
Thanks to @groxxda on irc for pointing out the fix!
Updated to completely remove unneeded path argument, suggested by @joachifm
Updated to remove other occurences of `all-packages.nix` from files as
suggested by @domenkozar
Maximilian Bosch
Jonas Chevalier
Linus Heckemann
Samuel Dionne-Riel
Scott Olson
