Commit graph

634 commits

Author SHA1 Message Date
Eelco Dolstra 33c3f91885
Handle queryPathInfo() failure from substituters when fallback is enabled
Fixes #1990.
2018-09-07 16:35:48 +02:00
Eelco Dolstra c0c31b58a4
Add localhost alias for ::1 to the sandbox 2018-08-31 11:12:51 +02:00
Yorick 72a78beb34
Fix #2162: use getaddrinfo instead of curl to preload NSS 2018-06-12 13:05:14 +02:00
Eelco Dolstra 4ac4f675df
Don't require --fallback to recover from disappeared binary cache NARs 2018-06-05 16:04:41 +02:00
Eelco Dolstra 737ed88f35
Modularize config settings
Allow global config settings to be defined in multiple Config
classes. For example, this means that libutil can have settings and
evaluator settings can be moved out of libstore. The Config classes
are registered in a new GlobalConfig class to which config files
etc. are applied.

Relevant to https://github.com/NixOS/nix/issues/2009 in that it
removes the need for ad hoc handling of useCaseHack, which was the
underlying cause of that issue.
2018-05-30 13:28:01 +02:00
Eelco Dolstra c717d8e3bd
Don't set a CA assertion for paths with references
Really fixes #2133.
2018-05-03 14:49:56 +02:00
Eelco Dolstra 53ec5ac69f
Fix some random -Wconversion warnings 2018-05-02 13:56:34 +02:00
Shea Levy 8e6108ff71
Merge branch 'aarch64-armv7' of git://github.com/lheckemann/nix
Support extra compatible architectures (#1916)
2018-04-23 08:48:22 -04:00
Will Dietz 6d9129014d build.cc: fix bind-mount of /dev/{pts,ptmx} fallback
Don't bind-mount these to themselves,
mount them into the chroot directory.

Fixes pty issues when using sandbox on CentOS 7.4.
(build of perlPackages.IOTty fails before this change)
2018-04-20 12:24:23 -05:00
Eelco Dolstra c74f838620
exportReferences: Check whether the path is in the input closure
Fixes #2082.
2018-04-17 12:03:27 +02:00
Eelco Dolstra d34fa2bcc3
Fix #1921 2018-04-13 15:42:35 +02:00
Eelco Dolstra f87e286e82
Merge branch 'fix/avoid-large-stack-buffers' of https://github.com/dtzWill/nix 2018-03-22 13:19:25 +01:00
Eelco Dolstra 668ac3ea2c
Make <nix/buildenv.nix> a builtin builder
This avoids sandbox annoyances.
2018-03-20 17:28:09 +01:00
Eelco Dolstra 1aca195e52
Hack to get SSH error messages from build-remote
E.g.

  cannot build on 'ssh://mac1': cannot connect to 'mac1': bash: nix-store: command not found
  cannot build on 'ssh://mac2': cannot connect to 'mac2': Host key verification failed.
  cannot build on 'ssh://mac3': cannot connect to 'mac3': Received disconnect from 213... port 6001:2: Too many authentication failures
  Authentication failed.
2018-03-20 15:25:26 +01:00
Eelco Dolstra ca14b14200
Use boost::format from the boost package
Note that this only requires headers from boost so it doesn't add a
runtime dependency.

Also, use Nixpkgs 18.03.
2018-03-14 19:24:04 +01:00
Eelco Dolstra 6e60141a80
Typo 2018-03-13 17:48:09 +01:00
Will Dietz 56253bb08f rand() -> random(), since we use srandom().
rand() requires we call srand() instead,
but might as well use random().
2018-03-06 17:44:25 -06:00
Will Dietz 6b9a03f5d8 hoist vector out of loop just in case 2018-03-02 10:52:05 -06:00
Will Dietz c89a3d5368 don't allocate large buffers on the stack 2018-03-02 10:52:04 -06:00
Linus Heckemann 919c3c20b3 seccomp: add 32-bit ARM on aarch64-linux
This allows building armv[67]l-linux derivations on compatible aarch64
machines. Failure to add the architecture may result from missing
hardware support, in which case we can't run 32-bit binaries and don't
need to restrict them with seccomp anyway,
2018-02-27 00:32:15 +00:00
Eelco Dolstra d4e93532e2
Fix incorrect (and unnecessary) format string
https://hydra.nixos.org/eval/1434547#tabs-now-fail
2018-02-19 20:46:39 +01:00
Shea Levy e59a8a63e1
Don't silently succeed seccomp setup when !HAVE_SECCOMP.
Running Nix with build users without seccomp on Linux is dangerous,
and administrators should very explicitly opt-in to it.
2018-02-19 09:56:24 -05:00
Shea Levy 690ac7c90b
configure: Add a flag to disable seccomp.
This is needed for new arches where libseccomp support doesn't exist
yet.

Fixes #1878.
2018-02-18 02:35:01 -05:00
Eelco Dolstra 4f09ce7940
Fix 'deadlock: trying to re-acquire self-held lock'
This was caused by derivations with 'allowSubstitutes = false'. Such
derivations will be built locally. However, if there is another
SubstitionGoal that has the output of the first derivation in its
closure, then the path will be simultaneously built and substituted.

There was a check to catch this situation (via pathIsLockedByMe()),
but it no longer worked reliably because substitutions are now done in
another thread. (Thus the comment 'It can't happen between here and
the lockPaths() call below because we're not allowing multi-threading'
was no longer valid.)

The fix is to handle the path already being locked in both
SubstitutionGoal and DerivationGoal.
2018-02-12 17:06:06 +01:00
Eelco Dolstra 960e9c560e
nix: Ensure that the user sees errors from substituters 2018-02-09 15:06:47 +01:00
Eelco Dolstra 84989d3af2
Improve filtering of ANSI escape sequences in build logs
All ANSI sequences except color setting are now filtered out. In
particular, terminal resets (such as from NixOS VM tests) are filtered
out.

Also, fix the completely broken tab character handling.
2018-02-07 15:23:57 +01:00
Eelco Dolstra bb1d046f5c
Allow substituters to be marked as trusted
This is needed by nixos-install, which uses the Nix store on the
installation CD as a substituter. We don't want to disable signature
checking entirely because substitutes from cache.nixos.org should
still be checked. So now we can pas "local?trusted=1" to mark only the
Nix store in /nix as not requiring signatures.

Fixes #1819.
2018-02-05 18:08:30 +01:00
Eelco Dolstra 2175eee9fe
Fix segfault using non-binary cache stores as substituters 2018-02-05 17:46:43 +01:00
Eelco Dolstra 84722d67d2
Remove nix-build --hash
Instead, if a fixed-output derivation produces has an incorrect output
hash, we now unconditionally move the outputs to the path
corresponding with the actual hash and register it as valid. Thus,
after correcting the hash in the Nix expression (e.g. in a fetchurl
call), the fixed-output derivation doesn't have to be built again.

It would still be good to have a command for reporting the actual hash
of a fixed-output derivation (instead of throwing an error), but
"nix-build --hash" didn't do that.
2018-02-03 10:08:05 +01:00
Dan Peebles d43a8b25f0 Fix obscure corner case in name resolution for builtin:fetchurl in sandboxed environments 2018-01-23 14:45:50 -05:00
Eelco Dolstra 3c4c30eadd
Rewrite builtin derivation environment
Also add a test.

Fixes #1803.
Closes #1805.
2018-01-19 15:00:38 +01:00
Eelco Dolstra ba75c69e00
Barf when using a diverted store on macOS
Fixes #1792.
2018-01-15 12:14:43 +01:00
Will Dietz 00e0c416ff Mark comparison call operator as const 2017-12-11 12:08:40 -06:00
Eelco Dolstra b52846ab5b
Show log tail when a remote build fails 2017-11-28 15:36:28 +01:00
Eelco Dolstra 197922ea4e
Merge pull request #1646 from copumpkin/optional-sandbox-local-network
Allow optional localhost network access to sandboxed derivations
2017-10-30 18:54:40 +01:00
Dan Peebles 4a4a009f78 Allow optional localhost network access to sandboxed derivations
This will allow bind and connect to 127.0.0.1, which can reduce purity/
security (if you're running a vulnerable service on localhost) but is
also needed for a ton of test suites, so I'm leaving it turned off by
default but allowing certain derivations to turn it on as needed.

It also allows DNS resolution of arbitrary hostnames but I haven't found
a way to avoid that. In principle I'd just want to allow resolving
localhost but that doesn't seem to be possible.

I don't think this belongs under `build-use-sandbox = relaxed` because we
want it on Hydra and I don't think it's the end of the world.
2017-10-30 17:59:12 +01:00
Eelco Dolstra 9971d875a4
Fix building on clang
https://hydra.nixos.org/build/62945761
2017-10-25 17:20:47 +02:00
Eelco Dolstra 82327e3cc4
exportReferencesGraph: Allow exporting a list of store paths 2017-10-25 15:18:49 +02:00
Eelco Dolstra 3395e3bbc4
Fix exportReferencesGraph in the structured attrs case 2017-10-25 14:08:29 +02:00
Eelco Dolstra 2d5b1b24bf
Pass lists/attrsets to bash as (associative) arrays 2017-10-25 13:01:50 +02:00
Eelco Dolstra 3460e4cf00
More progress indicator improvements
In particular, don't show superfluous "fetching path" and "building
path(s)" messages, and show the current round (with --repeat).
2017-10-24 15:32:38 +02:00
Eelco Dolstra 96051dd057
More progress indicator improvements
Fixes #1599.
2017-10-24 14:47:23 +02:00
Eelco Dolstra be220702a7
Progress indicator: Show on what machine we're building
E.g.

  $ nix build nixpkgs.hello --builders 'root@wendy'
  [1/0/1 built] building hello-2.10 on ssh://root@wendy: checking for minix/config.h... no
2017-10-24 14:24:57 +02:00
Eelco Dolstra fe9d2f974d
Handle log messages from build-remote
This makes the progress indicator show statuses like "connecting to
'root@machine'".
2017-10-24 14:05:22 +02:00
Eelco Dolstra 25f32625e2
Remove the remote-builds option
This is superfluous since you can now just set "builders" to empty,
e.g. "--builders ''".
2017-10-24 11:00:16 +02:00
Eelco Dolstra 37fbfffd8e
Pass all settings to build-remote
This ensures that command line flags such as --builders get passed
correctly.
2017-10-23 20:50:28 +02:00
Dan Peebles 6e5165b773 Shift Darwin sandbox to separate installed files
This makes it slightly more manageable to see at a glance what in a
build's sandbox profile is unique to the build and what is standard. Also
a first step to factoring more of our Darwin logic into scheme functions
that will allow us a bit more flexibility. And of course less of that
nasty codegen in C++! 😀
2017-10-17 19:15:51 -04:00
Eelco Dolstra 1dd29d7aeb
Add option to disable the seccomp filter
I needed this to test ACL/xattr removal in
canonicalisePathMetaData(). Might also be useful if you need to build
old Nixpkgs that doesn't have the required patches to remove
setuid/setgid creation.
2017-10-12 18:21:55 +02:00
Eelco Dolstra 88e6bb76de Communicate the structured log FD to builders
Since we may use a dedicated file descriptor in the future, this
allows us to change it. So builders can do

  if [[ -n $NIX_LOG_FD ]]; then
    echo "@nix { message... }" >&$NIX_LOG_FD
  fi
2017-09-08 11:27:10 +02:00
Eelco Dolstra 0b606aad46
Add automatic garbage collection
Nix can now automatically run the garbage collector during builds or
while adding paths to the store. The option "min-free = <bytes>"
specifies that Nix should run the garbage collector whenever free
space in the Nix store drops below <bytes>. It will then delete
garbage until "max-free" bytes are available.

Garbage collection during builds is asynchronous; running builds are
not paused and new builds are not blocked. However, there also is a
synchronous GC run prior to the first build/substitution.

Currently, no old GC roots are deleted (as in "nix-collect-garbage
-d").
2017-09-05 20:43:42 +02:00