I had started the trend of doing `std::visit` by value (because a type
error once mislead me into thinking that was the only form that
existed). While the optomizer in principle should be able to deal with
extra coppying or extra indirection once the lambdas inlined, sticking
with by reference is the conventional default. I hope this might even
improve performance.
I found it somewhat confusing to have an error like
error: attribute 'getFlake' missing
if the required experimental-feature (`flakes`) is not enabled. Instead,
I'd expect Nix to throw an error just like it's the case when using e.g. `nix
flake` without `flakes` being enabled.
With this change, the error looks like this:
$ nix-instantiate -E 'builtins.getFlake "nixpkgs"'
error: Cannot call 'builtins.getFlake' because experimental Nix feature 'flakes' is disabled. You can enable it via '--extra-experimental-features flakes'.
at «string»:1:1:
1| builtins.getFlake "nixpkgs"
| ^
I didn't use `settings.requireExperimentalFeature` here on purpose
because this doesn't contain a position. Also, it doesn't seem as if we
need to catch the error and check for the missing feature here since
this already happens at evaluation time.
This actually bit me quite recently in `nixpkgs` because I assumed that
`nix-build --check` would also error out if hashes don't match anymore[1]
and so I wrongly assumed that I couldn't reproduce the mismatch error.
The fix is rather simple, during the output registration a so-called
`delayedException` is instantiated e.g. if a FOD hash-mismatch occurs.
However, in case of `nix-build --check` (or `--rebuild` in case of `nix
build`), the code-path where this exception is thrown will never be
reached.
By adding that check to the if-clause that causes an early exit in case
of `bmCheck`, the issue is gone. Also added a (previously failing)
test-case to demonstrate the problem.
[1] https://github.com/NixOS/nixpkgs/pull/139238, the underlying issue
was that `nix-prefetch-git` returns different hashes than `fetchgit`
because the latter one fetches submodules by default.
This fixes
$ nix path-info -r $(type -P ls)
/nix/store/vfilzcp8a467w3p0mp54ybq6bdzb8w49-coreutils-8.32
/nix/store/5d821pjgzb90lw4zbg6xwxs7llm335wr-libunistring-0.9.10
...
/nix/store/mrv4y369nw6hg4pw8d9p9bfdxj9pjw0x-acl-2.3.0
/nix/store/vfilzcp8a467w3p0mp54ybq6bdzb8w49-coreutils-8.32
Also, output the paths in topologically sorted order like we used to.
This is important if the remote side *does* execute
nix-store/nix-daemon successfully, but stdout is polluted
(e.g. because the remote user's bashrc script prints something to
stdout). In that case we have to shutdown the write side to force the
remote nix process to exit.
Instead of
error: serialised integer 7161674624452356180 is too large for type 'j'
we now get
error: 'nix-store --serve' protocol mismatch from 'sshtest@localhost', got 'This account is currently not available.'
Fixes https://github.com/NixOS/nixpkgs/issues/37287.
Previously, type or coercion errors for string interpolation, path
interpolation, and plus expressions were always reported at the
beginning of the outer expression. This leads to confusing evaluation
error messages making it hard to accurately diagnose and then fix the
error.
For example, errors were reported as follows.
```
cannot coerce an integer to a string
1| let foo = 7; in "bar" + foo
| ^
cannot add a string to an integer
1| let foo = "bar"; in 4 + foo
| ^
cannot coerce an integer to a string
1| let foo = 7; in "x${foo}"
| ^
```
This commit changes the ExprConcatStrings expression vector to store a
sequence of expressions *and* their expansion locations so that error
locations can be reported accurately. For interpolation, the error is
reported at the beginning of the entire `${foo}`, not at the beginning
of `foo` because I thought this was slightly clearer. The previous
errors are now reported as:
```
cannot coerce an integer to a string
1| let foo = 7; in "bar" + foo
| ^
cannot add a string to an integer
1| let foo = "bar"; in 4 + foo
| ^
cannot coerce an integer to a string
1| let foo = 7; in "x${foo}"
| ^
```
The error is reported at this kind of precise location even for
multi-line indented strings.
This probably helps with at least some of the cases mentioned in #561
It's now disabled by default for the following:
* 'nix search' (this was already implied by read-only mode)
* 'nix flake show'
* 'nix flake check', but only on the hydraJobs output
Without this, flakes within the same tree and same lock data will have
the same fingerprint and the eval cache for one flake will be
incorrectly used for another.
Alternative to #4639. You can still read flake.lock, but at least in
reproducible workflows like NixOS configurations where you require a
non-dirty tree, evaluation will fail because there is no rev.
With --no-write-lock-file, it's possible that flake.lock is out of
sync with the actual inputs used by the evaluation. So doing fromJSON
(readFile ./flake.lock) will give wrong results.
Fixes#4639.
Before this commit, the dns lookup in preloadNSS would still go through
nscd. This did not have the effect of loading the nss_dns.so as expected
(nss_dns.so being out of reach from within the sandbox).
Should LOCALDOMAIN environment variable be defined, nss will completely
avoid nscd and will do its dns resolution on its own.
By temporarly setting LOCALDOMAIN variable before calling in NSS, we can
force NSS to load the shared libraries as expected.
Fixes#5089
Signed-off-by: Arthur Gautier <baloo@superbaloo.net>
In dry run mode, new derivations can't be create, so running the command on anything that has not been evaluated before results in an error message of the form `don't know how to build these paths (may be caused by read-only store access)`.
For comparison, the classical `nix-build --dry-run` doesn't use read-only mode.
Closes#1795
(cherry picked from commit 54525682df707742e58311c32e9c9cb18de1e31f)
If the store path contains a flake, this means that a command like
"nix path-info /path" will show info about /path, not about the
default output of the flake in /path. If you want the latter, you can
explicitly ask for it by doing "nix path-info path:/path".
Fixes#4568.
Store paths are only allowed to contain a limited subset of the
alphabet, which doesn’t include `!`. So don’t create lockfiles that
contain this `!` character as that would otherwise confuse (and break)
the gc.
Fix#5176
When doing e.g.
nix-build -A package --keep-failed --option \
builders \
'ssh://mfhydra?remote-store=/home/bosch/store x86_64-linux - 10 4 big-parallel'
this doesn't work properly because this build-setting is ignored.
I changed this behavior by passing the `settings.keepFailed` through the
serve-protocol to remote machines to make sure that I can introspect the
build-directory (which is particularly helpful when I have to look at a
`config.log` from a failed build for instance).
This fixes a use-after-free bug:
1. s = new EvalState();
2. callFlake()
3. static vCallFlake now references s
4. delete s;
5. s2 = new EvalState();
6. callFlake()
7. static vCallFlake still references s
8. crash
Nix 2.3 did not have a problem with recreating EvalState.
This fixes a class of crashes and introduces ptr<T> to make the
code robust against this failure mode going forward.
Thanks regnat for the idea of a ref<T> without overhead!
Closes#4895Closes#4893Closes#5127Closes#5113
“packages” was probably meant to be “packages.${system}.” but that
is already listed in `getDefaultFlakeAttrPathPrefixes` in `installables`,
which is probably why no one noticed it was broken.
It currently fails with the following error:
error: flake 'git+file://…' does not provide attribute 'devShells.x86_64-linuxhaskell', 'packages.x86_64-linux.haskell', 'legacyPackages.x86_64-linux.haskell' or 'haskell'
For git+file and path flakes, chdir to flake directory so that phases
that expect to be in the flake directory can run
Fixes https://github.com/NixOS/nix/issues/3976
Use `$(libdir)` while installing .pc files looks like a more generic
solution. For example, it will work for distributions like RHEL or
Fedora where .pc files are installed in `/usr/lib64/pkgconfig`.
This replaces the O(n) search complexity in our insert code with a
lookup of O(log n). It also makes removing waitees easier as we can use
the extract method provided by the set class.
Previously the code ensures that the isBase32 array would only be
initialised once in a single-threaded context. If two threads happen to
call the function before the initialisation was completed both of them
would have completed the initialization step. This allowed for a
race-condition where one thread might be done with the initialization
but the other thread sets all the fields to false again. For a brief
moment the base32 detection would then produce false-negatives.
`nix-shell --pure` when applied to a non stdenv derivation doesn't seem
to clear the PATH. It expects the stdenv/setup file to do so.
This adds an explicit `unset PATH` by nix-build.cc (nix-shell) itself so
that it's not reliant on stdenv/setup anymore.
This does not break impure nix-shell since the PATH is persisted as the
variable `p` prior in the bash rcfile
fixes#5092
Previously, despite having a boolean that tracked initialization, the
decode characters have been "calculated" every single time a base64
string was being decoded.
With this change we only initialize the decode array once in a
thread-safe manner.
The experimental features are, well, experimental, and shouldn’t be
carelessly and transparently enabled.
Besides, some (`ca-derivations` at least) need to be enabled at startup
in order to work properly.
So it’s better to just require that daemon be started with the right
`experimental-features` option.
Fix#5017
This extends https://github.com/NixOS/nix/pull/4978 with
supporting the SCP-like urls in expressions like
```nix
builtins.fetchGit {
url = "git@github.com:NixOS/nix.git";
ref = "master";
}
```
This adds a new store operation 'addMultipleToStore' that reads a
number of NARs and ValidPathInfos from a Source, allowing any number
of store paths to be copied in a single call. This is much faster on
high-latency links when copying a lot of small files, like .drv
closures.
For example, on a connection with an 50 ms delay:
Before:
$ nix copy --to 'unix:///tmp/proxy-socket?root=/tmp/dest-chroot' \
/nix/store/90jjw94xiyg5drj70whm9yll6xjj0ca9-hello-2.10.drv \
--derivation --no-check-sigs
real 0m57.868s
user 0m0.103s
sys 0m0.056s
After:
real 0m0.690s
user 0m0.017s
sys 0m0.011s
Otherwise I get a compiler error when building for NetBSD:
src/libutil/util.cc: In function 'void nix::_deletePath(const Path&, uint64_t&)':
src/libutil/util.cc:438:17: error: base operand of '->' is not a pointer
438 | AutoCloseFD dirfd(open(dir.c_str(), O_RDONLY));
| ^~~~~
src/libutil/util.cc:439:10: error: 'dirfd' was not declared in this scope
439 | if (!dirfd) {
| ^~~~~
src/libutil/util.cc:444:17: error: 'dirfd' was not declared in this scope
444 | _deletePath(dirfd.get(), path, bytesFreed);
| ^~~~~
With this, we don't have to copy the entire .drv closure to the
destination store ahead of time (or at all). Instead, buildPaths()
reads .drv files from the eval store and copies inputSrcs to the
destination store if it needs to build a derivation.
Issue #5025.
In particular, this now works:
$ nix path-info --eval-store auto --store https://cache.nixos.org nixpkgs#hello
Previously this would fail as it would try to upload the hello .drv to
cache.nixos.org. Now the .drv is instantiated in the local store, and
then we check for the existence of the outputs in cache.nixos.org.
It supports functions as well. Also change `package` to
`derivation` because it operates at the language level and does
not open the derivation (which would be useful but not nearly
as much).
It does not operate on a derivation and does not return a
derivation path. Instead it works at the language level,
where a distinct term "package" is more appropriate to
distinguish the parent object of `meta.position`; an
attribute which doesn't even make it into the derivation.
Some people want to avoid using registries at all on their system; Instead
of having to add --no-registries to every command, this commit allows to
set use-registries = false in the config. --no-registries is still allowed
everywhere it was allowed previously, but is now deprecated.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
- This can legitimately happen (for example because of a non-determinism
causing a build-time dependency to be kept or not as a runtime
reference)
- Because of older Nix versions, it can happen that we encounter a
realisation with an (erroneously) empty set of dependencies, in which
case we don’t want to fail, but just warn the user and try to fix it.
Fill `NIX_CONFIG` with the value of the current Nix configuration before
calling the nix subprocesses in the repl
That way the whole configuration (including the possible
`experimental-features`, a possibly `--store` option or whatever) will
be made available.
This is required for example to make `nix repl` work with a custom
`--store`
Fill `NIX_CONFIG` with the value of the current Nix configuration before
calling the post-build-hook.
That way the whole configuration (including the possible
`experimental-features`, a possibly `--store` option or whatever) will
be made available to the hook
'--delete-older-than 10' deletes the generations older than a single day, and '--delete-older-than 12m' deletes all generations older than 12 days.
This changes makes it throw on those invalid inputs, and gives an example of a valid input.
We need to support it for the “old” fetch* functions for backwards
compatibility, but we don’t need it for fetchTree (as it’s a new
function).
Given that changing the `name` messes-up the content hashing, we can
just forbid passing a custom `name` argument to it
Before this commit, nixConfig.flake-registry didn't have any real effect
on the evaluation, since config was applied after inputs were evaluated.
Change this behavior: apply the config in the beginning of flake::lockFile.
Pass the current experimental features using `NIX_CONFIG` to the various
Nix subprocesses that `nix repl` invokes.
This is quite a hack, but having `nix repl` call Nix with a subprocess
is a hack already, so I guess that’s fine.
`nix develop` is getting bash from an (assumed existing) `nixpkgs`
flake. However, when doing so, it reuses the `lockFlags` passed to the
current flake, including the `--input-overrides` and `--input-update`
which generally don’t make sense anymore at that point (and trigger a
warning because of that)
Clear these overrides before getting the nixpkgs flake to get rid of the
warning.
Add an access-control list to the realisations in recursive-nix (similar
to the already existing one for store paths), so that we can build
content-addressed derivations in the restricted store.
Fix#4353
Previously, the build system used uname(1) output when it wanted to
check the operating system it was being built for, which meant that it
didn't take into-account cross-compilation when the build and host
operating systems were different.
To fix this, instead of consulting uname output, we consult the host
triple, specifically the third "kernel" part.
For "kernel"s with stable ABIs, like Linux or Cygwin, we can use a
simple ifeq to test whether we're compiling for that system, but for
other platforms, like Darwin, FreeBSD, or Solaris, we have to use a
more complicated check to take into account the version numbers at the
end of the "kernel"s. I couldn't find a way to just strip these
version numbers in GNU Make without shelling out, which would be even
more ugly IMO. Because these checks differ between kernels, and the
patsubst ones are quite fiddly, I've added variables for each host OS
we might want to check to make them easier to reuse.
This way no derivation has to expect that these files are in the `cwd`
during the build. This is problematic for `nix-shell` where these files
would have to be inserted into the nix-shell's `cwd` which can become
problematic with e.g. recursive `nix-shell`.
To remain backwards-compatible, the location inside the build sandbox
will be kept, however using these files directly should be deprecated
from now on.
This is needed to push the adoption of structured attrs[1] forward. It's
now checked if a `__json` exists in the environment-map of the derivation
to be openend in a `nix-shell`.
Derivations with structured attributes enabled also make use of a file
named `.attrs.json` containing every environment variable represented as
JSON which is useful for e.g. `exportReferencesGraph`[2]. To
provide an environment similar to the build sandbox, `nix-shell` now
adds a `.attrs.json` to `cwd` (which is mostly equal to the one in the
build sandbox) and removes it using an exit hook when closing the shell.
To avoid leaking internals of the build-process to the `nix-shell`, the
entire logic to generate JSON and shell code for structured attrs was
moved into the `ParsedDerivation` class.
[1] https://nixos.mayflower.consulting/blog/2020/01/20/structured-attrs/
[2] https://nixos.org/manual/nix/unstable/expressions/advanced-attributes.html#advanced-attributes
Make sure that the derivation we send to the remote builder is exactly
the one that we want to build locally so that the output ids are exactly
the same
Fix#4845
Useful when we're using a daemon with a chroot store, e.g.
$ NIX_DAEMON_SOCKET_PATH=/tmp/chroot/nix/var/nix/daemon-socket/socket nix-daemon --store /tmp/chroot
Then the client can now connect with
$ nix build --store unix:///tmp/chroot/nix/var/nix/daemon-socket/socket?root=/tmp/chroot nixpkgs#hello
That doesn’t really make sense with CA derivations (and wasn’t even
really correct before because of FO derivations, though that probably
didn’t matter much in practice)
Resolve the derivation before trying to load its environment −
essentially reproducing what the build loop does − so that we can
effectively access our dependencies (and not just their placeholders).
Fix#4821
Make ca-derivations require a `ca-derivations` machine feature, and
ca-aware builders expose it.
That way, a network of builders can mix ca-aware and non-ca-aware
machines, and the scheduler will send them in the right place.
When the `keep-going` option is set to `true`, make `nix flake check`
continue as much as it can before failing.
The UI isn’t perfect as-it-is as all the lines currently start with a
mostly useless `error (ignored): error:` prefix, but I’m not sure what
the best output would be, so I’ll leave it as-it-is for the time being
(This is a bit hijacking the `keep-going` flag as it’s supposed to be a
build-time only thing. But I think it’s faire to reuse it here).
Fix https://github.com/NixOS/nix/issues/4450
When adding a path to the local store (via `LocalStore::addToStore`),
ensure that the `ca` field of the provided `ValidPathInfo` does indeed
correspond to the content of the path.
Otherwise any untrusted user (or any binary cache) can add arbitrary
content-addressed paths to the store (as content-addressed paths don’t
need a signature).
Linux is (as far as I know) the only mainstream operating system that
requires linking with libdl for dlopen. On BSD, libdl doesn't exist,
so on non-FreeBSD BSDs linking will currently fail. On macOS, it's
apparently just a symlink to libSystem (macOS libc), presumably
present for compatibility with things that assume Linux.
So the right thing to do here is to only add -ldl on Linux, not to add
it for everything that isn't FreeBSD.
